Quality based on German standards
Quality based on German standards
From the initial sample to series maturity: our products undergo strict and comprehensive quality controls, managed and carried out in Germany. This enables us to guarantee compliance with all specifications, guidelines and standards – and satisfy the strictest demands.

What's in the Box

- 1 LED bulb

Technical Specs

Colour Reproduction Index RA (min.) 80
Light Colour Warm White
Colour Consistency 4 ≤
EAR Reg.No. DE 38720470
Lighting technology used LED Lamp
Can be Dimmed Yes
Colour Temperature 2700 K
Lamp socket E 27
Operating Position 360 °
Optimal Ambient Temperature 25 °C
Power Consumption of an Equivalent Incandescent Lamp 60 W
Diameter 60 mm
Height 110 mm
Net Weight 60 g
Lamp Current 42 mA
Suitable for Accent Lighting No - Beam Angle between 120° and 360° (Φuse)

Note for Consumers

This LED bulb is designed for use in open fixtures. The heat produced during operation can thus be given off to the environment. The prognosticated service life refers to use in open fixtures. The bulb's service life is reduced if it is used in closed fixtures (insufficient cooling). Only use in appropriate fixtures. When replacing the bulb, it must be allowed to completely cool off and the mains voltage has to be switched off. Exchange damaged bulbs straightaway. No liability for improper use.
Among the huge number of different dimmers there may be some which impede the function of bulbs (flickering, noise).
Mixed operation, i.e. simultaneous use of LED bulbs and standard bulbs or different types of LED bulbs in one dimmer lead is not possible. Noise in dimmers that has not been noticed while using incandescent lamps: dimmer is not suitable for LED bulbs.
Corded dimmers (dimmer built in power cord) need a separate on/off switch as they may not be able to regulate to 0.
Please observe the minimum load of the dimmer, otherwise it may not start or control falsely. Simple dimmers mostly function from 60W to 400W.
The fundamental brightness of built-in dimmers must be set at a high enough level, otherwise the LED bulb may not be switched on.
Change the dimmer setting slowly and not suddenly or too fast.
Only use dimmers for incandescent lamps, no dimmers for transformers, etc.
Touch dimmers are mostly not suitable. A wrong dimmer can cause permanent damage to the bulb!

Downloads

Product Data Sheet

Download

Function tested with