Use of cookies
This website uses cookies and various web services to provide you with an optimal user experience. By using mandatory cookies, we ensure that all main functions of this website are available to you.
With your agreement, further features of our website will become available to you, such as searching for retail shops, product videos and sharing content with friends.
You can revoke your agreement at any time. Information on this and even more on the subject of cookies and the various web services can be found in our Privacy Policy.
- 1 LED filament
| Colour Reproduction Index RA (min.) | 80 |
| Light Colour | Warm White |
| Beam angle | 330 ° |
| Colour Consistency | 2.5 ≤ |
| Colour-tuneable light source | No |
| EAR Reg.No. | DE 38720470 |
| Energy consumption in on-mode | 4 kWh/1000h |
| Energy Efficiency Class A to G | E |
| Flicker for LED and OLED MLS | 0.05 < |
| Frequency | 50 Hz |
| L70B50 lifetime for LED and OLED light sources | 15000 h |
| Lighting technology used | LED Lamp |
| Light source | Non-directiona |
| Lumen maintenance factor (LED/OLED) | 80 % |
| On-mode power (Pon): | 4 W |
| Operating Voltage (AC) | 230 V |
| R9 colour rendering index value | 13.9 |
| Shift factor for Pon (min.) | 0.55 |
| Stroboscopic effect for LED and OLED MLS | 0 |
| Survival factor (for LED and OLED) | 0.9 |
| Useful luminous flux (Φ360) | 470 lm |
| Can be Dimmed | No |
| Colour Temperature | 2700 K |
| Cooling Element/Housing | Glass |
| Design / Diameter / Height | Globe G 80 / 80 mm / 115 mm |
| IP protection class | IP20 (Dry Rooms) |
| Lamp socket | E 27 |
| Nominal Service Life | 15000 h |
| Operating Position | 360 ° |
| Optimal Ambient Temperature | 25 °C |
| Power Consumption of an Equivalent Incandescent Lamp | 40 W |
| Special Feature | LED-Filament |
| Net Weight | 44 g |
| Lamp Current | 35 mA |
| Recommendations for Recycling | Recycling Depot or Collection Point |
| Suitable for Accent Lighting | No - Beam Angle between 120° and 360° (Φuse) |
The LED bulb should only be used in lights intended for its use. Before changing the bulb, allow it to cool down completely and switch off the power supply voltage. Damaged bulbs should be replaced immediately. No liability shall be assumed for damage caused by incorrect use.
The LED bulb is designed for operation in open lights. The heat generated by the bulb during operation may be emitted into the surrounding area. The service life prognosis is based on this mode of operation. LED bulbs can, of course, also be used in enclosed lights, however their service life will be reduced by insufficient cooling. Non-dimmable!
