LED Filament, G9, 200lm replaces 20W, capsule, warm white

E Item Type : Lamps
4,54 EUR SRP
VAT included

More product information

  • Particularly energy-efficient light bulb, uses only 1.8 watts of electricity
  • For all lights with conventional G9 holders
  • Less power and heat generation than conventional halogen bayonet base bulbs
  • Exceptionally low consumption is ideal for permanent illumination, e.g. as a night light in bedrooms or in corridors
  • Fully insulated, stylish plastic housing
Quality based on German standards
Quality based on German standards
From the initial sample to series maturity: our products undergo strict and comprehensive quality controls, managed and carried out in Germany. This enables us to guarantee compliance with all specifications, guidelines and standards – and satisfy the strictest demands.

What's in the Box

- 1 LED filament

Technical Specs

Colour Reproduction Index RA (min.) 80
Light Colour Warm White
Beam angle 300 °
Colour-tuneable light source No
EAR Reg.No. DE 38720470
Energy consumption in on-mode 2 kWh/1000h
Energy Efficiency Class A to G E
Flicker for LED and OLED MLS 0.6 ≤
Frequency 50 Hz
L70B50 lifetime for LED and OLED light sources 15000 h
Lighting technology used LED Lamp
Light source Non-directiona
Lumen maintenance factor (LED/OLED) 80 %
On-mode power (Pon): 1.8 W
R9 colour rendering index value 13.5
Shift factor for Pon (min.) 0.41
Stroboscopic effect for LED and OLED MLS 0.26
Survival factor (for LED and OLED) 0.9
Useful luminous flux (Φ360) 200 lm
Can be Dimmed No
Colour Temperature 2700 K
Design / Diameter / Height Base Pin / 20 mm / 60 mm
IP protection class IP20 (Dry Rooms)
Lamp socket G 9
Operating Position 360 °
Optimal Ambient Temperature 25 °C
Power Consumption of an Equivalent Incandescent Lamp 20 W
Special Feature LED-Filament
Net Weight 9 g
Lamp Current 20 mA
Suitable for Accent Lighting No - Beam Angle between 120° and 360° (Φuse)

Note for Consumers

The LED bulb is designed for operation in open lights. The heat generated by the bulb during operation may be emitted into the surrounding area.
The service life prognosis is based on this mode of operation. LED bulbs can, of course, also be used in enclosed lights, however their service life will be reduced by insufficient cooling. The LED bulb should only be used in lights intended for its use. Before changing the light, allow it to cool down completely and switch off the power supply voltage. Damaged bulbs should be replaced immediately. No liability shall be assumed for damage caused by incorrect use. Non-dimmable!

Downloads

Product Data Sheet

Download