LED Filament, E27, 650 lm 8 W, Vintage Lamp Globe 125, Dimmable, warm white

Catégorie : Special Bulb
11,99 EUR Prix de vente TTC conseillé indicatif
TVA incluse

More product information

  • Particularly energy-efficient decorative light bulb uses only 8 Watts of electricity
  • The special LED strips mean that this bulb looks like and is the same size as a conventional globe bulb.
  • The amber-coloured glass creates an extra-warm, yellowish and atmospheric light and can be used as a decorative, mood or night light
  • Fine vintage look with full glass housing creates design accents
  • Not suitable as standalone room lighting
  • Dimmable
Quality based on German standards
Quality based on German standards
From the initial sample to series maturity: our products undergo strict and comprehensive quality controls, managed and carried out in Germany. This enables us to guarantee compliance with all specifications, guidelines and standards – and satisfy the strictest demands.

What's in the Box

- 1 LED filament

Détails Techniques

Alimentation 230 V
Consommation d'énergie pondérée 8 kWh/1000h
Consommation nominale 8 W
Fréquence secteur 50 Hz
Angle d'émission 270 °
Compatible avec les variateurs oui
Couleur lumière / couleur température Extra Warm White - 1800K
Douille E 27
Durée de vie 15000 h
Particularité LED-Filament
Position de fonctionnement 360 °
Structure G 120
Température optimale 25 °C
Valeur RA 80
Diamètre 125 mm
Hauteur 175 mm
Poids Net 100 gr
Flux lumineux nominal 650 lm
Voltage 47 mA
Convient particulièrement à Eclairage décoratif, Veilleuse orientable

Note for Consumers

Due to the light colour, this article is not suitable for room lighting and is therefore not subject to EU Directive 2019/2015. As a result, the article also does not have an energy label.
The LED light is designed for operation in open luminaires: the heat generated by the light during operation can therefore be emitted into the surroundings. The service life prognosis is based on this mode of operation. The service life is reduced by insufficient cooling when used in enclosed luminaires. Allow the light to cool down completely before changing it and switch off the power supply voltage. Damaged lights should be replaced immediately. No liability shall be assumed for damage caused by incorrect use. Some dimmers can impair the function of the light (flickering, noise).
Mixed operation, i.e. the simultaneous operation of LED bulbs and standard incandescent bulbs or LED bulbs of different types on one dimmer cable, is not possible. If noises are heard with dimmers that were not noticed with incandescent bulbs: Dimmer is not suitable for LED bulbs and can develop a fault. Dimmers integrated into the power cable require a separate on/off switch since they may not be able to regulate right down to 0.
Note the dimmer's minimum load, otherwise it may not switch on or it may control the light incorrectly. Simple dimmers usually work from 60W to 400W. For dimmers that have a basic brightness setting, this must be set high enough otherwise the LED bulb may not switch on. Dim slowly and evenly. Incorrect dimmers can permanently damage lighting.