LED Bulb, E27, 806 lm Replaces 60W, Incand. Bulb, warm white, 2 Pcs

F Item Type : Lamps
3,59 EUR SRP
VAT included

More product information

  • Particularly energy-efficient light bulb, uses only 8.5 Watts of electricity
  • High light yield
  • Very low energy consumption
  • Low heat generation without UV radiation
  • Full lighting power instantly after switch-on
  • Stylish, white plastic housing
  • Can easily replace conventional incandescent bulbs
Quality based on German standards
Quality based on German standards
From the initial sample to series maturity: our products undergo strict and comprehensive quality controls, managed and carried out in Germany. This enables us to guarantee compliance with all specifications, guidelines and standards – and satisfy the strictest demands.

What's in the Box

- 2 LED bulbs

Technische Eigenschaften

Farbwiedergabeindex RA (min.) 80
Lichtfarbe Warmweiß
Halbwertswinkel 180 °
Farbkonsistenz 6 ≤
Farblich abstimmbare Lichtquelle Nein
EAR Reg.Nr. DE 38720470
Energieverbrauch im Ein-Zustand 9 kWh/1000h
Energie Effizienz Label (A bis G) F
Flimmern [Pst LM] LED und OLED bei Netzspg. 0,1 ≤
Frequenz 50 Hz
Eingangsspannung 230 V
L70B50-Lebensdauer für LED und OLED Lichtquellen 15000 h
Verwendete Beleuchtungstechnologie LED Lampe
Lichtquellentyp Ungebündeltes Licht
Leistungsaufnahme (Pon) 8,3 W
Wert des R9-Farbwiedergabeindex 1
Verschiebungsfaktor bei Pon (min.) 0,5
Stroboskop Effekt [SVM] LED und OLED bei Netzspg. 0,1
Lebensdauerfaktor für LED und OLED 0,9
Nutzlichtstrom (Φ360°) 806 lm
Dimmbar Nein
Farbtemperatur 3000 K
Bauform / Durchmesser / Höhe Glühlampe / 60 mm / 108 mm
IP-Schutzklasse IP20 (Trockene Räume)
Lampen Sockel E 27
Brennlage 360 °
Optimale Umgebungstemperatur 25 °C
Leistungsaufnahme einer äquivalenten Glühlampe 60 W
Lampenstrom 58 mA
Geeignet für Akzentbeleuchtung Nein - Halbwertswinkel zw. 120° und 360° (Φuse)

Note for Consumers

The LED light is designed for operation in open luminaires. The heat generated by the light during operation may be emitted into the surrounding area.
The predicted service life is based on this mode of operation. LED lights can, of course, also be used in enclosed luminaires, however their service life will be reduced by insufficient cooling. The LED bulb should only be used in lights intended for its use. Before changing the light, allow it to cool down completely and switch off the power supply voltage. Damaged lights should be replaced immediately. No liability shall be assumed for damage caused by incorrect use. Non-dimmable!

Downloads

Produktdatenblatt

Download