Quality based on German standards

Quality based on German standards

From the initial sample to series maturity: our products undergo strict and comprehensive quality controls, managed and carried out in Germany. This enables us to guarantee compliance with all specifications, guidelines and standards – and satisfy the strictest demands.

What's in the Box

- 1 LED filament

Technical Specs

Indice de rendu des couleurs 80
Température de couleur Blanc chaud
Alimentation en mode marche (Pon) : 6 W
Angle de faisceau 300 °
Choix/réglage de la couleur lumineuse Non
Classe d'efficacité énergétique (A à G) E
Consommation d'énergie en mode marche 6 kWh/1000h
Durée de vie L70B50 - LED et OLED 15000 h
Effet stroboscopique pour LED et OLED MLS 0,9
Facteur de décalage pour Pon (min.) 0,5
Facteur de durée de vie (pour LED et OLED) 0,9
Facteur de maintien du flux lumineux (LED/OLED) 93,1 %
Flicker pour LED et OLED MLS 1 ≤
Flux lumineux utile (Φ360) 806 lm
Fréquence 50 Hz
Indice de rendu des couleurs R9 4
Rég. EAR N° DE 38720470
Source de lumière connectée (CLS) Non
Source lumineuse Non directionnel
Stabilité de la couleur 4 ≤
Technologie d'éclairage utilisée Ampoule LED
Tension d'entrée 230 V
IP protection class IP20 (Dry Rooms)
Can be Dimmed No
Lamp socket E 14
Power Consumption of an Equivalent Incandescent Lamp 60 W
Special Feature LED-Filament
Operating Position 360 °
Design / Diameter / Height Candle / 35 mm / 98 mm
Colour Temperature 2700 K
Optimal Ambient Temperature 25 °C
Net Weight 14 g
Lamp Current 40 mA
Suitable for Accent Lighting No - Beam Angle between 120° and 360° (Φuse)

Note for Consumers

The LED light is designed for operation in open luminaires. The heat generated by the light during operation may be emitted into the surrounding area.
The service life prognosis is based on this mode of operation. LED lights can, of course, also be used in enclosed luminaires, however their service life will be reduced by insufficient cooling. The LED bulb should only be used in lights intended for its use. Before changing the light, allow it to cool down completely and switch off the power supply voltage. Damaged lights should be replaced immediately. No liability shall be assumed for damage caused by incorrect use. Non-dimmable!

Downloads

Product Data Sheet

Download