- 1 LED filament
Indice de rendu des couleurs | 80 |
Température de couleur | Blanc chaud |
Alimentation en mode marche (Pon) : | 2,4 W |
Angle de faisceau | 330 ° |
Colour-tuneable light source | No |
Energy Efficiency Class A to G | F |
Energy consumption in on-mode | 3 kWh/1000h |
L70B50 lifetime for LED and OLED light sources | 15000 h |
Stroboscopic effect for LED and OLED MLS | 0.8 |
Shift factor for Pon (min.) | 0.93 |
Survival factor (for LED and OLED) | 0.9 |
Lumen maintenance factor (LED/OLED) | 80 % |
Flicker for LED and OLED MLS | 0.3 ≤ |
Useful luminous flux (Φ360) | 250 lm |
Frequency | 50 Hz |
R9 colour rendering index value | 11 |
EAR Reg.No. | DE 38720470 |
Connected light source (CLS) | No |
Light source | Non-directiona |
Colour Consistency | 1.1 ≤ |
Lighting technology used | LED Lamp |
Input Voltage | 230 V |
IP protection class | IP20 (Dry Rooms) |
Can be Dimmed | No |
Lamp socket | E 14 |
Power Consumption of an Equivalent Incandescent Lamp | 25 W |
Special Feature | LED-Filament |
Operating Position | 360 ° |
Design / Diameter / Height | Candle turned / 35 mm / 100 mm |
Colour Temperature | 2700 K |
Optimal Ambient Temperature | 25 °C |
Net Weight | 14 g |
Lamp Current | 11 mA |
Suitable for Accent Lighting | No - Beam Angle between 120° and 360° (Φuse) |
The LED bulb should only be used in lights intended for its use. Before changing the light, allow it to cool down completely and switch off the power supply voltage. Damaged lights should be replaced immediately. No liability shall be assumed for damage caused by incorrect use.
The LED light is designed for operation in open luminaires. The heat generated by the light during operation may be emitted into the surrounding area. The service life prognosis is based on this mode of operation. LED lights can, of course, also be used in enclosed luminaires, however their service life will be reduced by insufficient cooling. Non-dimmable!